Our news

06 February
CFD software to enhance the efficiency of product life cycle

CFD software to enhance the efficiency of product life cycle

The Global CFD(Computational Fluid Dynamics) market in Aerospace and Defense industry is expected to grow at a 14% over the period 2012-2016, reveals a report by ‘Research And Markets’, a source for international market research and market data

Read more
15 March
Wider spacing leads to greater farm efficiency according to CFD study

Wider spacing leads to greater farm efficiency according to CFD study

Conventional wisdom says to space wind turbines about seven rotor diameters apart to keep rotor wash from interfering with other turbines. But after a few fluid flow simulations and lab experiments, researchers at Johns Hopkins and Belgium’s Katholik Leuven University say that conventional wisdom needs an upgrade. “Optimal spacing between individual wind turbines is actually a little farther apart than what people use these days,” said Johns Hopkins’ Charles Meneveau. A little farther means 15 diameters. Why so much more?

Read more
08 November
FEA Aids Deepwater Horizon Failure Forensics

FEA Aids Deepwater Horizon Failure Forensics

On the evening of April 20, 2010, Deepwater Horizon suffered a blowout while drilling in the Macondo Prospect, an area in the Gulf of Mexico 40 miles off the southeast coast of Louisiana. The platform caught fire; two days later, it sank. Many attempts were made to seal the well, but oil continued to spew into the Gulf until July 15, when a temporary cap was put in place. Relief wells then pumped concrete into the area underneath the wellhead, and the well was deemed permanently sealed in mid-September.

Read more
21 June
DNV unveils new 3D marine simulation tech

DNV unveils new 3D marine simulation tech

DNV Software launches Sesam Marine, a software which enhances 3D simulation and visualisation for marine operations

Read more
<< < 2 3 4 5 6 7 8 > >>
Use of Cookies
We use third-party and own cookies to enhance the browsing experience, and provide content of interest. By continuing navigation, we understand that you accept our cookies policy.
Close